Install Build Platform

The build platform is an assembly comprised of:

  • A large, flat platform

  • A handle

  • A connection cavity.

The flat area of the build platform is where cured material will adhere during the printing process. The build platform is nickel-plated. It is used for medical and technical applications.

  1. Open the printer’s hood.

  1. Turn the build platform knob on the top of the printer a couple of times to loosen it.

  1. Slide the build platform into the build platform housing at the top of the Z-axis tower.

  1. Turn the build platform knob to tighten and secure the build platform in place.

Troubleshooting build platform installation.

Important: Make sure the build platform is tightened securely before building. Failure to do so will cause the build platform to be uneven and can cause build failures.
Important: Make sure the magnet of the build platform is tightly coupled with the magnet on the printer.