Related Topics
Important: The Automatic Home Position Calibration or Auto Homing is only possible if the printer is equipped with Load cells, therefore enabling the Dry position calibration.
Important: The home position calibration can be performed only when the parallelism is achieved, see Check Parallelism and Calibration.
-
Go to Settings > Move & Calibration > Home Calibration > Auto Homing.
→ The following message appears.
-
Select the material tray from the list.
→ The following screen appears.
-
Select OK.
→ The platform starts moving to its Dry position.
→ Once the platform finds its Dry position, it starts moving to a Zero position.
→ Dry position calibration has been saved.
Important: Make sure your material tray does not contain material in it. Material residue in the material tray during the calibration will give a false reading to the sensors.