Unbox Printer

Your Einstein™ printer arrives in a box, with several of accessories boxes. The printer box and accessories boxes will be on top of a pallet. Use a dolly or pallet jack to take the printer to its working site.

• Printer box: Einstein, USB drive

• External components box: Starter kit, build platform, spare material tray.

• Optional boxes: Parts curing apparatus, parts washing apparatus, if purchased.

The following tools are required to complete the unboxing process:

• A pair of box cutters/scissors

• Flathead screwdriver

• Dolly /Pallet-Jack

• One person to assist

Before opening the box, make sure you see no visible damage or broken sensors. If these are present, please inform Customer Support immediately. If everything is in good condition:

1. Using box cutters, carefully cut the box straps.

2. Remove the top of the box.

3. Remove any accessories boxes from the pallet, and place them on a flat sturdy work surface.

4. Remove the vinyl strap holding the printer in place.

5. With the help of a colleague, carefully lift the printer from the pallet, and place it on a sturdy flat surface capable of holding over 36.3 kg (80 lb).

6. Keep and store the printer box.

Unbox External Hardware

The External Hardware box contains:

• Material tray

• Build platform

• Starter kit

Unbox and set these aside for later installation.

Unbox Accessories

If the printer was ordered with any accessories, material, or extra material trays, these items will be sent separately.

Keep the curing apparatus box, the parts washer box, and the spare material tray box.