Add Material to Material Tray

Each material has specific instructions for use. Be sure to properly prepare your specific material before each use.  Always observe the relevant Material Safety Data Sheets supplied with the material bottle.

CAUTION

Use the appropriate personal protective equipment.

Make sure that the extraction is sufficient. Desktop Health® recommends an air change of 25 m³/h per m² effective surface of the laboratory as described in EN 13779.

1. To open the hood, pull the hood lock on the rear side and then lift the hood upwards.

20220406_Einstein_Pro_XL-Open_hood-lowx500.png

2. Shake the material bottle well. Open the material bottle and pour the material slowly into the material tray. 

3. Mix the material thoroughly with a supplied material mixing card.

4. Close the hood to protect the material from ambient light.