Envision One RP supports files of the following formats: : *.stl, *.3mf, *.cli, and *.slc.
There are several ways to open a file:
- Press Menu > Open and select your model.
- Drag and drop a model directly into the open Envision One RP software.
- Click the + sign and select your model.
- Press <Ctrl>+<O> and select your model.
Important: All models need to be within the limits of the printable space. Models running off the edge of the white space in the Envision One RP software will be cut off and will not print. Any model added to the grey space in the software will not print at all.