Orientation of the model impacts its stability and printability, this is why it is essential to properly orient your model. Envision One RP allows you to orient your model either manually or automatically. You can also select another base for your model thus changing its orientation.
Notice: To fulfill the operation, open and select at least one 3D model.
Orient Model Manually
1. Press the icon.
2. Choose the axis to align the model in the X, Y or Z.
3. Use the + and – buttons to set the required value of a rotation angle. The value of one step is 1°.
Orient Model Automatically
1. Press the 2. Select a part for changing orientation. 3. Select the automatic orientation mode based on your requirements:
4. Press Apply for All or Apply for Selected correspondingly depending on your actions in step 2. |
![]() |
Select Model Base
There are two ways to select a base for your model. Below you can find how each of the ways works.
Method 1
1. Press the icon.
2. Press Select Base.
→ A new base selection marker appears.
3. Select a new base by clicking the surface that you want to orient toward the build platform.
→ The model orientation is changed.
4. Press Done.
Method 2
1. Press the icon and hold the mouse button pressed.
2. Drag the icon to the location you want to select as a new base.
3. Once a new base is selected, release the mouse button.
→ The model base has been changed.
Important: Once a new model base is selected, regenerate supports for the model. Read more in the article Generating Supports Automatically about it.