Envision One RP Installers and Changelogs

Changed:

• Improved Job Slicer
• Updated warning messages
• Replaced printer icons
• Revisioned Button types

Changed:

• Adding Heating parameters to the job file

Fixed:

• Model deletion option inside GIZMO icon

Changed:

• Minor change of the Hyper Print widget
• Adding file extension to job file automatically

Added:

• Notifications about the Support Center update

Added:

• New icons for printers’ visualization 

Fixed:

• Outer offset feature
• Main window resizing issues
• Model is not displayed when the bottom view is enabled
• Selected printer is not highlighted in the printers list
• Command-line interface issues

Changed:

• The minimum limit for tip thickness
• Replaced GIZMO icons
• Replaced Grid icons
• Improved projection type visualization
• Platform rotation using keyboard

Fixed:

• App crash after special denture loading

Fixed:

• The first flat bottom layer detection
• Translation ‘Generate for All’ into French
• The camera freeze after loading several models using Ctrl+O

Changed:

• Improved orientation and placement algorithm for Flexcera™ Smile to increase corner cases coverage
• Smart Sweep feature axes for Xtreme 8K DLP printer

Fixed:

• Flexcera™ Smile upgrade

Fixed:

• Flexcera™ Smile upgrade

Fixed:

• Job generation canceling

Added:

• Ability to move support points while holding down the ‘Ctrl’ key

Fixed:

• Fixes for Hyper Print modes

Added:

• Drag and drop support points
• Minimize the Job Info widget
• New 3D platform view

Fixed:

• The Fix All Issues button causes changes in the placed models
• Support points are not modifiable after model copying
• Memory leaks upon the import of models

Changed:

• Improved convergence for Xtreme 8K DLP printer
• Improved flow of supports editing
• The Fix All button automatically takes models out of the platform
• The Slice Preview mode is switched off automatically after loading a new model

Added:

• Full model name is shown when hovering on it

Fixed:

• Crash when trying to generate supports
• Crash when starting the app if the outdated buildstyle is detected

Added:

• Support of P4K Advantage printer
• Deletion of imported files via Command-line interface

Fixed:

• Heating parameters for Xtreme 8K DLP printer

Fixed:

• Job generation failure due to out-of-bounds model after Shrinkage Compensation
• Job file reading for the Perfactory printer
• Support points are missed after rotation by Z-axis

Added:

• License request form is extended with the support for the Xtreme 8K DLP printer

Fixed:

• Opening of the project file that consists of SLC models
• A-type support fills out the label letters
• Labeling cancellation process
• Corrected estimated print time for Xtreme 8K DLP printer
• Localization of the Expiration Date in the License request

Changed:

• Hierarchy of app folders
• Limits for Xtreme 8K DLP printer
• Limit for label engraving
• Improved manual editing of supports contact points

Added:

• Secure communication with D4K Pro printer

Fixed:

• Contact points can’t be removed after supports’ generation
• Incorrect time estimation with enabled support extra exposure
• Job file upload cannot be canceled for high models

Changed:

• Improved Command Line response messages
• Unified duplicating logic via Ctrl+V, Position widget, and the right-click menu
• Disabled ‘Restore to defaults’ option if there is nothing to restore

Added:

• Support of Xtreme 8K DLP printer

Fixed:

• Printers discovery by a secure connection

Added:

• Logging of Computer ID generation failures

• Technical issues

• Issue with the cutting of some models
• Issue with the app log file size
• Issue with DLL files

• Improved Hyper Print Dental placement
• Improved supports generation time

• Extended the Command-Line features list
• Automatic crash dump collection when app crashes

• The approach for vertical orientation of dental models is updated

• In some rare cases, A-type supports cover the text on the dental model bottom

• App crashes if opening a project or a model by double-clicking
• Printer added by IP isn’t selected automatically
• Model outside the platform isn’t displayed in Printability issues
• License request can be sent with an empty machine SN

• Improved auto-placement of tiny jewelry models

• Connection of Info icons to the Support Center
• Support of a new CDLM technology

• License request cannot be sent for Other machine types

• Improved performance of the Hyper Print A-type Jaw
• Including the Supports Extra Exposure time to the Print time estimation
• Improved layers splitting in job file with enabled Supports Extra Exposure

• Printer Serial Number validation for D4KPro
• Job sending to the printer via FTP
• Notification in case of project saving failure
• Notification in the main window about an available update
• Feature highlights after update

• Job generation failure due to model out of build envelope bounds
• App crash on very tall models loading

• Spherical supports attachment area

• Missing Layers during job generation

• A-type supports extrusion height
• Spherical supports attachment area

• Disable auto-scan of Perfactory machines by config

• Job generation with Soft Offset
• Automatic change of the diameter of support pins

• A-type supports shape
• Forbidden printing of the job generated with default buildstyle
• Explicit message for layer thickness mismatch of the sliced data

• Printer SN validation in the License request form
• Limited license excluding Envision One RP updates
• License expiration date synchronization with Envision One CS
• License expiration date synchronization with Envision One CS
• Channels visibility from the bottom view on the model

• “Print” button does not work if pressing not the center of the button
• Not selected model becomes visible when generating supports via edit supports

• Workflow with supports in case of Printer or Material change

• Chamfer & Burn-in offset for dental parts
• Support of Vida cDLM and Perfactory printers in Envision One RP

• Zero supports height cannot delete existing supports
• The wrong job folder name is generated when generating job from the command-line
• Ramping feature

• Place the platform’s bounding box in the center of the viewpoint when switching camera views
• Three dots in the middle of the long file names
• Removed list of issues when hovering on the Printability sign

• Communication with a printer using printer serial number

• Rotation of models with supports via ‘Orientation’ widget
• Empty model names in the Job Report
• Crash during Print dialog opening with intersected models

• Increased preciseness after the comma in Size widget
• Channeling checkbox availability for sliced data
• Order for checking layer thickness for sliced data
• File extension visibility in ‘Create New Project’ window

• Supports structures upload with sliced data
• Solid view mode for sliced data
• Machine Serial Number visibility during Shrinkage factor calibration
• Limits for entering values in Shrinkage factor calibration
• Rotation angle on GIZMO
• Settings block to simplify Labeling for several models
• Redirect to ‘Supports and Base’ widget in Printability issues

Date of Release: Aug-27-2020

• Contact points can be hanging out of the model
• Model is placed on the largest flat surface instead of tilting

• Improved memory consumption during work with sliced data
• Improved the platform view to make it closer and changed the view angle
• Reworked Input applying in Widgets

• Work with a new D4K Pro printer
• Supports config file selection directly in ‘Supports and Base’ widget
• Channeling Parameters Activation on GUI
• Upload buildstyles in bulk via GUI