To start printing, you should create and configure your new project.
1. Open Envision One RP.
2. Go to Menu > New.
→ The following window opens.
3. Select a printer you are going to print with.
4. Select the required material and set the layer thickness.
Note: The buildstyles are filtered according to the selected printer, material, and layer thickness.
See the Installing a Buildstyle page for more details.
Note: You may select the color of dental models next to the Material field. It determines the color of the
displayed models on the build platform in Envision One RP.
5. Press Create.
→ A new project has been created.
The platform is actually the printable space. It is represented by the white grid on the screen. This space is measured by X, Y, and Z range.
By default, Envision One RP shows the platform from the Top view when it opens. The lower-left corner of the screen will display the word Top if you are in Top view.
Now you can add your models to the platform.