Articles in this section

Install Build Platform on Einstein
For Internal and VAR/Sales Partner Use Only - Do Not Share
Internal Use Only - Do Not Share

Avatar
Knowledge Base Team
  • Updated
Follow Print

What is Build Platform?

The build platform is an assembly comprised of:

  • A large, flat platform
  • A handle
  • A connection cavity

The flat area of the build platform is where cured material will adhere during the printing process. The build platform is nickel-plated. It is used for medical and technical applications.

 20220119-Einstein-Croppedx500.png
New-build-platform-blur-300x180.png

 

How to Install Build Platform?

1. Open the printer’s hood.

20220119-Einstein-Opening_hood-no_platform_no_material_trayx500.png
 

2. Turn the build platform knob on the top of the printer a couple of times to loosen it.

20211201-Loosen-the-build-platform-torque-knobx500.png

 

3. Slide the build platform into the build platform housing at the top of the Z-axis tower.

20211201-Slide-the-build-platform-torque-knobx500.png
 

 

4. Turn the build platform knob to tighten and secure the build platform in place.

20211201-Tighten-the-build-platform-torque-knobx500__1_.png

 

Troubleshooting build platform installation.

 

Important: Make sure the build platform is tightened securely before building. Failure to do so will cause the build platform to be uneven and can cause build failures.

Important: Make sure the magnet of the build platform is tightly coupled with the magnet on the printer.

20220908-Einstein-Build_Platform_Install_-_Magent.png

Related articles