Software Update
To update Einstein with a new version of the software, check the Software Update tab on the touchscreen which provides information about the current versions of software and the new versions of software if they are available.
Go to Settings > Printer Settings > Software Update to open the tab.
If the latest versions of the software are installed on the printer, the ChangeLog button is available. It allows the operator to check detailed information about the current versions of software.
If there are any software updates, the Update button is available.
Important: Do not turn the printer off during the update!
1. Press Update.
→ The following screen appears. It shows information about the changes in the new software versions.
2. Press Start.
→ The process of printer updating starts.
→ The following screen appears.
4. To apply changes, reboot the printer. It will reboot automatically in 30 seconds. To reboot the printer manually, press Reboot.
Custom Software Update
There is also an option for users to get a custom version of the Control Software that contains special features or an early bug fix. Once that custom Control Software version is ready, users will receive an encrypted version number and would be able to install that custom update on the printer.
1. In the Software Update tab, press Change Version.
→ The following screen appears.
Notice: If no custom updates are installed yet, the Apply button will be grayed out.
2. Press Add Version.
→ The following screen appears.
3. Type in the encrypted version number.
4. Select the needed version from the list. Press Apply.
→ The system saves the previously installed Control Software version.
→ The following screen appears.
5. Press Start.
→ The Experience Improvement message appears asking if you allow the data collection to improve the experience with our products.
6. Press OK to allow data collection or Skip to skip this step.
→ The process of printer updating starts.
→ After a successful printer update, the following screen appears.
7. To apply changes, reboot the printer. It will reboot automatically in 30 seconds. To reboot the printer manually, press Reboot.