Articles in this section

Install Build Platform on Einstein Pro XL
For Internal and VAR/Sales Partner Use Only - Do Not Share
Internal Use Only - Do Not Share

Avatar
Knowledge Base Team
  • Updated
Follow Print

Description

The build platform is an assembly comprised of:

· A large, flat platform

· A handle

· A connection cavity

Cured material adheres to the flat area of the build platform during the printing process. The build platform is nickel-plated and is used for medical and technical applications.

 DH_EinsteinProXL_Hero_WhiteBG_TransparentPNG_FINAL-cropped.png

Installation Steps

  1. To open the hood, pull the hood lock on the rear side and then lift the hood upwards.  

20220406_Einstein_Pro_XL-Open_hood-low-_no_platform_no_material_trayx500.png

  1. Turn the build platform knob on the top of the printer a couple times to loosen it.

20220408-Einstein_Pro_XL-Loosen_the_build_platform_torque_knobx500.png

 

  1. Slide the build platform into the build platform housing at the top of the Z-axis tower.

20220408-Einstein_Pro_XL_-_Slide_the_build_platformx500.png

 

  1. Turn the build platform knob to tighten and secure the build platform in place.

20220408-Einstein_Pro_XL_-_Tighten_the_build_platform_torque_knobx500.png

 

Important: Securely tighten the build platform before printing. Failure to do so will cause the build platform to be uneven and can cause build failures.

Related articles