Time needed: Approximately two minutes
Maintenance frequency: Print-by-Print
The printer’s metal casing protects the internal components from damage. To avoid spilling material on the casing, always hold a paper towel under the build platform and the material tray while installing or removing. Once spilled, the material cures to the casing and it is difficult to remove it.
- Wipe the spilled material as soon as it touches the printer before it cures.
- Remove most of the spill with a dry paper towel first, then lightly spray a second paper towel with IPA and wipe away any residue.
Note: If rubbed with too much pressure or for too long, the casing may become discolored.