Buildstyle is a set of parameters that communicates with a printer on how to process the material it is printing.
Tip: See Install Buildstyle Envision One RP for instructions connecting a new buildstyle to Envision One RP Software. See Printer Calibration for instructions calibrating your new buildstyle.
All released Envision One cDLM buildstyles for Dental Materials are available for download below:
-
EnvisionOne_Model_Z_100um_v1.0.bs
50 KB Download
-
EnvisionOne_Flexcera Base_100µm_v1.0.bs
50 KB Download
-
EnvisionOne_Flexcera Smile Ultra+_50µm_v1.0.bs
50 KB Download
-
EnvisionOne_Flexcera Smile_100µm_v1.0.bs
50 KB Download
-
EnvisionOne_Flexcera Smile Ultra+_100µm_v1.0.bs
50 KB Download
-
EnvisionOne_Model_X_50um_v1.0.bs
50 KB Download
-
EnvisionOne_E-Tray_100µm_v1.0.bs
50 KB Download
-
EnvisionOne_E-Model Light DLP_50um.bs
40 KB Download
-
EnvisionOne_E-Model Light DLP_100um.bs
40 KB Download
-
EnvisionOne_E-Guide ET_100µm_v2.0.bs
60 KB Download
-
EnvisionOne_SmileGuard_100µm_v2.0.bs
60 KB Download
-
EnvisionOne_E-Guard ET_100µm_v2.0.bs
60 KB Download
-
EnvisionOne_E-Guard Blue_100µm_v2.0.bs
60 KB Download
-
EnvisionOne_KeySplint Soft_100um_v1.0.bs
50 KB Download