Buildstyle is a set of parameters that communicates with a printer on how to process the material it is printing.
Tip: See Install Buildstyle Envision One RP for instructions connecting a new buildstyle to Envision One RP Software. See Printer Calibration for instructions calibrating your new buildstyle.
All released Einstein buildstyles for Dental Materials are available for download below:
-
Einstein_Flexcera_Base_100µm_v1.6.bs
50 KB Download
-
Einstein_Model_Z_100µm_v1.6.bs
50 KB Download
-
Einstein_Model_X_50µm_v1.6.bs
50 KB Download
-
Einstein_Flexcera_Smile_100µm_v1.7.bs
50 KB Download
-
Einstein_Flexcera_Smile_Ultra+_100µm_1.7.bs
50 KB Download
-
Einstein_Flexcera_Smile_Ultra+_50µm_v1.0.bs
50 KB Download
-
Einstein_KeySplint_Soft_100µm_v1.0.bs
50 KB Download
-
Einstein_SmileGuard_100µm_v1.0.bs
60 KB Download
-
Einstein_E-Tray_100µm_v1.0.bs
60 KB Download
-
Einstein_E-Guard_100µm_vertical_orientated_v2.0.bs
60 KB Download
-
Einstein_E-Guard_100µm_horizontal_orientated_v2.0.bs
60 KB Download
-
Einstein_E-Guard_Blue_100µm_horizontal_orientated_v2.0.bs
60 KB Download
-
Einstein_E-Guard_Blue_100µm_vertical_orientated_v2.0.bs
60 KB Download
-
Einstein_E-Guide_100µm_vertical_orientated_v2.0.bs
60 KB Download
-
Einstein_E-Guide_100µm_horizontal_orientated_v2.0.bs
60 KB Download
-
Einstein_Press-E-Cast_50µm_v1.0.bs
60 KB Download