Envision One cDLM Buildstyle Files

Buildstyle is a set of parameters that communicates with a printer on how to process the material it is printing.

Tip: See Upload Buildstyle File for instructions connecting a new buildstyle to Live Build DLP Software. See Printer Calibration for instructions calibrating your new buildstyle.

All released Envision One cDLM buildstyles for Dental Materials are available for download below:

EnvisionOne_Flexcera Base Ultra+_50um_V1.0.bs
EnvisionOne_Flexcera Base Ultra+_100um_V1.0.bs
EnvisionOne_Flexcera Smile Ultra+_50µm_v1.0.bs
EnvisionOne_Flexcera Smile Ultra+_100µm_v1.0.bs
EnvisionOne_Model_Z_100um_v1.0.bs
EnvisionOne_Flexcera Base_100µm_v1.0.bs
EnvisionOne_Flexcera Smile_100µm_v1.0.bs
EnvisionOne_Model_X_50um_v1.0.bs
EnvisionOne_E-Tray_100µm_v1.0.bs
EnvisionOne_E-Model Light DLP_50um.bs
EnvisionOne_E-Model Light DLP_100um.bs
EnvisionOne_E-Guide ET_100µm_v2.0.bs
EnvisionOne_SmileGuard_100µm_v2.0.bs
EnvisionOne_E-Guard ET_100µm_v2.0.bs
EnvisionOne_E-Guard Blue_100µm_v2.0.bs
EnvisionOne_KeySplint Soft_100um_v1.0.bs