Einstein Control Software Release Notes

Einstein™ CS 4.5

Note: This is the latest released version of the Einstein™ Control Software.

Release Status: Release

Date of release: Aug-15-2024

ADDED

Einstein™ CS 4.4

Release Status: Release

Date of release: Jul-02-2024

ADDED

CHANGED

  • Minor UI/UX improvements

FIXED

  • In the Job list the Select All check-box does not work well after several jobs deletions

Einstein CS 4.3

Release Status: Release

Date of release: May-15-2024

CHANGED

  • Enhanced Closed Loop Printing logic

  • Enhanced warning message details

FIXED

  • Continuous 'Checking images' loop after pressing the Abort button on the job printing screen

 

Einstein™ CS 4.2

Release Status: Release

Date of release: Apr-2-2024

VERSION

  • e1d-updater stable-c99-ga1319c1

  • build-ver v4.2-stable

  • Dlp3spCpuBoardFirmware stable-c81-g860974a

  • EnvisionCS stable-c104-g887f1b1

  • dlpcs_core stable-c123-gc7200badf

ADDED

  • Ability to delete job files in bulk in the Job List

  • Ability to reprint the completed job

  • Added printer IP to the printing screen

CHANGED

  • Material card reader decommission

Einstein™ CS 4.1

Release Status: Release

Date of release: Feb-22-2024

VERSION

  • e1d-updater stable-c95-g7c2e094

  • build-ver v4.1-stable

  • Dlp3spCpuBoardFirmware stable-c77-ge314187

  • EnvisionCS stable-c100-g32b9656

  • dlpcs_core stable-c119-gcdb3b6a8b

FIXED

  • Overload timeout issue

CHANGED

  • Improved logic for the Material card reader

Einstein™ CS 4.0

Release Status: Release

Date of release: Jan-17-2024

VERSION

  • e1d-updater stable-c91-gd3efc91

  • build-ver v4.0-stable

  • Dlp3spCpuBoardFirmware stable-c73-g5d17970

  • EnvisionCS stable-c96-ga67c931

  • dlpcs_core stable-c115-g25c2f181f

ADDED

  • Added Projector Power menu in the Move & Calibration section for adjusting projector power settings.

  • Added Active Mask menu in the Move & Calibration section for managing active masks.

  • Implemented unsupported Wi-Fi dongles detection.

CHANGED

  • Updated logo in the Statistics Report for rebranding purposes.

  • Improved Home Position Calibration message for cases when no material tray is selected.

Einstein™ CS 3.1

Release Status: Release

Date of release: Sep-21-2023

VERSION

  • e1d-updater stable-c86-gfb88e9a
  • build-ver v3.1-stable
  • Dlp3spCpuBoardFirmware stable-c68-g8af6d1a
  • EnvisionCS stable-c91-g1b897f8
  • dlpcs_core stable-c110-g2e72424fd

ADDED

  • Additional verification of the updated firmware version during the software update
FIXED
  • Occasional projector low flickering in standby mode

Einstein™ CS 3.0

Release Status: Release

Date of release: Aug-23-2023

VERSION

  • e1d-updater stable-c83-ge799da9
  • build-ver v3.0-stable
  • Dlp3spCpuBoardFirmware stable-c66-g4f3db1b
  • EnvisionCS stable-c87-g485bd1b
  • dlpcs_core stable-c106-gdae663792

ADDED

  • DNS configuration in the Static Ethernet settings
  • LED operating time to the Printer Statistics menu
  • QR codes for symptoms description in the Request Support menu
  • Display of the Remote Assist code validity period
  • Contact phone number in the Request Support menu
  • Space key to the virtual keyboard

CHANGED

  • Removed temperature checks for jobs with disabled heating
  • Resumed Usage Analytics after printer software recovery
  • Improved error messages
  • UI/UX improvements for the Job Printing menu
  • Reduced time for starting the print job
FIXED
  • Updated Layer Exposure Failed error
  • Changing of IP address in the Static mode after printer reboot

Einstein™ CS 2.2

Release Status: Release

Date of release: Dec-20-2022

VERSION

  • e1d-updater stable-c74-gb0f79b7
  • build-ver v2.2-stable
  • Dlp3spCpuBoardFirmware stable-c57-gae0efa6
  • EnvisionCS stable-c78-g7440c89
  • dlpcs_core stable-c97-gea0b855ff

ADDED

  • Printer’s IP in the log file
  • Ability to work with ramping parameters for CLP jobs
  • DLP TC controller parameter for technical user
  • ‘Preheat material during delay’ parameter to the Job Settings menu
  • QR codes for several screens

CHANGED

  • CLP logic improvements
  • Auto Homing checks
  • DLP TC & Delta TC error messages improvements
  • Certain job statuses
  • Improved Load Cells logging and errors handling
  • Jobs transfer and parsing
  • Maximum length of VNC password
FIXED
  • Load Cells errors detection with non-CLP jobs
  • Connection loss with DLP board during printing of CLP jobs that also require heating
  • Layer exposure stops after job abort during separation
  • Continued heating after failed sensors verification
  • Improved workflow of job aborting
  • Manual Debris Removal after aborted job
  • Recovery with enabled Remote Assist

Einstein™ CS 2.1

Release Status: Hotfix

Date of release: Sep-02-2022

VERSION

  • e1d-updater stable-c69-gb77bca1
  • build-ver v2.1-stable
  • Dlp3spCpuBoardFirmware stable-c52-ga6c780c
  • EnvisionCS stable-c75-gc6b8296
  • dlpcs_core stable-c94-g44c409c7

ADDED

  • CLP improvement

Einstein™ CS 2.0

Release Status: Release

Date of release: Aug-11-2022

VERSION

  • e1d-updater stable-c69-gb77bca1
  • build-ver v2.0-stable
  • Dlp3spCpuBoardFirmware stable-c49-g2128a2c
  • EnvisionCS stable-c72-g22b8104
  • dlpcs_core stable-c91-g34f54d699

FIXED

  • Home-Safe delta on the Home Calibration screen

ADDED

  • Automatic USB Light Sensor flashing
  • Heating management via DLP board
  • New material tag type support
  • Hint for Other symptoms screen
  • Ability to save and select emails from the list on the Request support screen
  • AdHoc feature support
  • Support of print job names in different languages
  • New Wi-Fi adapter support
  • Ability to print jobs with both CLP and Support extra exposure parameters

CHANGED

  • QR code icons
  • Default printer name
  • Load Cells calibration procedure
  • Naming of Internal Settings menus
  • Improvement of error messages
  • Calibration image

Einstein™ CS 1.4

Release Status: Hotfix

Date of release: Jun-14-2022

VERSION

  • e1d-updater stable-c68-gd3a5521
  • build-ver v1.4-stable
  • Dlp3spCpuBoardFirmware stable-c48-g8ea9f7c
  • EnvisionCS stable-c71-g1fd26ea
  • dlpcs_core stable-c89-gf4cf06a7

FIXED

  • DLP board firmware

Einstein™ CS 1.3

Release Status: Release

Date of release: May-3-2022

VERSION

  • e1d-updater stable-c68-gd3a5521
  • build-ver v1.3-stable
  • Dlp3spCpuBoardFirmware stable-c48-g8ea9f7c
  • EnvisionCS stable-c71-g1fd26ea
  • dlpcs_core stable-c88-gd98d1871

CHANGED

  • Quick calibration values limit
  • Improved logs writing
  • Improved ET Cloud registration and statistics
  • Job list scrolling
  • Icons and text redesign

Einstein™ CS 1.2

Release Status: Release

Date of release: Mar-31-2022

VERSION

  • e1d-updater stable-c65-ge399ad7
  • build-ver v1.2-stable
  • Dlp3spCpuBoardFirmware stable-c44-g6907c08
  • EnvisionCS stable-c68-gc9720a5
  • dlpcs_core stable-c85-ga51b07ac

FIXED

  • Support of the new revision of touchscreen

Einstein™ CS 1.1

Release Status: Release

Date of release: Mar-14-2022

VERSION

  • e1d-updater stable-c64-g98e8465
  • build-ver v1.1-stable
  • Dlp3spCpuBoardFirmware stable-c44-g6907c08
  • EnvisionCS stable-c68-gc9720a5
  • dlpcs_core stable-c84-g52ff0f888

FIXED

  • Improved board firmware

Einstein™ CS 1.0

Release Status: Release

Date of release: Feb-17-2022

VERSION

  • e1d-updater stable-c64-g98e8465

  • build-ver v1.0-stable

  • Dlp3spCpuBoardFirmware stable-c42-g3c2b8f3

  • EnvisionCS stable-c67-g69e5974

  • dlpcs_core stable-c83-gb0cce9603

ADDED

  • The first official version of Control Software for Einstein printers