Einstein Buildstyle Files

Buildstyle is a set of parameters that communicates with a printer on how to process the material it is printing.

Tip: See Upload Buildstyle File for instructions connecting a new buildstyle to Live Build DLP Software. See Printer Calibration for instructions calibrating your new buildstyle.

All released Einstein buildstyles for Dental Materials are available for download below:

Einstein_Flexcera Base Ultra+_50µm_V1.0.bs
Einstein_Flexcera Base Ultra+_100µm_V1.0.bs
Einstein_Flexcera_Smile_Ultra+_50µm_v1.0.bs
Einstein_Flexcera_Smile_Ultra+_100µm_1.7.bs
Einstein_Flexcera_Smile_100µm_v1.7.bs
Einstein_Flexcera_Base_100µm_v1.6.bs
Einstein CLP_SmileGuard_45deg_100µm_v2.0.bs
Einstein_E-Guard_100µm_horizontal_orientated_v2.0.bs
Einstein_E-Guard_100µm_vertical_orientated_v2.0.bs
Einstein_E-Guard_Blue_100µm_horizontal_orientated_v2.0.bs
Einstein_E-Guard_Blue_100µm_vertical_orientated_v2.0.bs
Einstein_E-Guide_100µm_horizontal_orientated_v2.0.bs
Einstein_E-Guide_100µm_vertical_orientated_v2.0.bs
Einstein_E-Model_light_DLP_50µm_v1.0.bs
Einstein_E-Tray_100µm_v1.0.bs
Einstein_Key Mask_100µm_v1.0.bs
Einstein_KeyDentureTry-In_100µm_v1.0.bs
Einstein_KeyGuide_100um_v1.0.bs
Einstein_KeyOrthoIBT_100um_v1.0.bs
Einstein_KeySplint_Soft_100µm_v1.0.bs
Einstein_Model_X_50µm_v1.9.bs
Einstein_Model_Z_100µm_v1.9.bs
Einstein_Press-E-Cast_50µm_v1.0.bs

SmartFilm Buildstyles

The following buildstyles are required for all Einstein™ printers with the SmartFilm installed. See SmartFilm Upgrade.

Einstein_E-Guard_100µm_v5.4.bs
Einstein_E-Guide_100µm_v5.4.bs
Einstein_E-Model_light_DLP_50µm_v5.4.bs
Einstein_Model X_50µm v5.4.bs
Einstein_Model_Z_100µm_v5.4.bs
Einstein_Press-E-Cast_50µm_v5.4.bs