Create Print Job in Live Build DLP

Important: All print jobs must pass through Live Build DLP model processing software before being transferred to the printer. Once the models are loaded, automatically fixed, oriented, and supported in Live Build DLP, they may be transferred to the printer as a folder containing a series of images and files. This information is used by the printer to build three-dimensional models.
  1. Open the Live Build DLP software.
  2. Select the printer, material, and layer thickness. See Set Up New Project.
  3. Add a model.
  4. Orient a model and add supports as needed, or use the Autopilot feature.
  5. Save the build job to a USB or transfer it directly to the printer. See Send Job to Printer.